Excellent weather protectionClosed versionTwo-component plastic hand coverBlack center section = maximum tear resistance for optimal protectionColored top and bottom sections = highly flexible when subjected to the toughest loadsSupplied in two different heightsImproved opticsTall version
Plug & play installationMain wiring is pre-wired for installationFail-safe double ignition interlockMotion sensor with integrated microchipTwo waterproof anti-scan radio transmitters with rolling codeTatcham approved (Europe's strictest testing procedure)An additional mounting kit is required for installation
Each headlight consumes 8 watts and has a light intensity of 4400 cd
Optimal illumination of the road thanks to the wide beam angle
Increased safety when travelling at night
Black powder-coated aluminium and plastic casing
Small size: 70 mm x 61 mm diameterOne headlight weighs 485 g
A USB charging socket can be optionally mounted on the relay...
ANTI-VIBRATION MODULE
Includes an anti-vibration module which decouples the smartphone from the smartphone bracket respectively the motorcycle with a specific developed elastomer inlay.It reduces the transfer of vibrations, generated by the motorcycle, to the smartphone and protects it`s sensitive components.
Can be mounted on older versions of the...
Optimal solution for quick and secure mounting of the smartphone in the vehicleThe smartphone can be easily removed with the case
Easy mountingNew “SPC+” mounting system
With protective cap
Easily accessible.
Convenient and easy to use.
For powering your navigator or other power-hungry devices.
Output voltage/current: 5 V/2000 mA
Quick Charge 2.0
The kit includes two lower handlebar mounts. The upper mounts and bolts required for handlebar mounting must be taken from the original handlebar mount.
The kit includes two lower riser parts and two mounting bolts.The upper riser parts and their bolts are used from the original kit.If in doubt, check compatibility with your motorcycle model and year.
FRONT WHEEL STANDRobust steel tube constructionTool for lifting the motorcycle by the fork tubesFacilitates front wheel removalTool for lifting the motorcycle by the fork tubes (includes housing adapter)
Protects the motorcycle from dust, scratches and the like.
Fabric that completely prevents the entry of dust and dirt
Material with special structure
The inner side has a soft lining
Effective headlight protectionVery stable and virtually unbreakable, but in the event of a break, the material does not shatter into piecesAlmost invisible, thus respecting the unique design of the ADVENTUREMade from Makrolon, a material also used on current KTM Factory Rally motorcycles
For all types of travelComfortable and easy to useExtremely lightweight.7.4V manual air compressor -Maximum pressure: 7.59 bar / 11 PSI / 759 kPaPower: 7.4 V; 6 A; 44.4 wattsMaximum runtime: 15 minutes (enough to inflate both tires)Powered by a 7.4 V, 2,200 mAh lithium-ion batteryThe hose and adapter can be stored in the crankcase.Charging cable with...
We use our own and third party cookies to collect information to improve our services and to analyze your browsing habits. If you continue browsing, it means acceptance of the installation of the same. You can configure your browser to prevent its installation. More information about cookies.
