Plug & play installationMain wiring is pre-wired for installationFail-safe double ignition interlockMotion sensor with integrated microchipTwo waterproof anti-scan radio transmitters with rolling codeTatcham approved (Europe's strictest testing procedure)An additional mounting kit is required for installation
PHDS HANDLEBAR DAMPING SYSTEM SX/EXC/SMR
DAMPENS, ABSORBS VIBRATIONS AND JOLTS IN ENGINE AND CHASSIS
2 ADJUSTABLE HANDLEBAR POSITIONS
PREVENTS INJURIES IN SHOULDERS AND WRISTS
ENGINE GUARDNever without it!Manufactured with the latest plastic injection technologyProduced with the toughest special resinsRedesigned and extremely durable mounting systemDeveloped for use on the toughest terrainMaximum protection with the lowest possible weightDesigned for a precise fit and developed specifically for the KTM rangeEasy assembly thanks...
Protect your valuable smartphoneOptimal solution for quickly and securely attaching your smartphone to your vehicleThe smartphone can be easily removed from the caseNew "SPC+" mounting system, but an adapter is also included to mount the case on the previous mounting system.Includes a magnetic ring to make the case also compatible with "MagSafe".Extremely...
Combines the durability of KTM standard grips with the comfort of KTM soft gripsHarder orange material on the inside and ends of the grip for increased durabilitySofter black material on the outside for increased comfort
Easy grip replacementRight hand grip permanently glued to the throttle grip.Left cuff with aluminum fastening ring for fixing to the handlebar.Inconvenient gluing and fixing with wire is no longer necessary
MADE OF PLASTIC HE AVOIDS TO DAMAGE THE LID OF THE WATER PUMP OR THE PIPE OF THE RADIATOR FOR THE ZONE OF THE CONNECTOR.
250 SX-F 13-14
350 SX-F 11-14
250 EXC-F 14
350 EXC-F 12-14
350 FREERIDE 12-14
IT PROTECTS THE LID OF THE CLUTCH BEFORE STONES THAT JUMP AND PREVENTS THE LEVER OF THE BRAKE FROM SINKING THE LID IN CASE OF FALL.
250 SX-F 13-14
350 SX-F 11-14
250 EXC-F 14
350 EXC-F 12-14
350 FREERIDE 12-14
Optimal protection against stone chips. Made of robust plastic. Protects the cover from brake lever pressure in the event of a fall. Fits the original outer clutch cover.
The contents comply with DIN 13167-2014 for female motorcycle riders.
With a waterproof cover.
The pharmacy can be easily placed on the rear thanks to its compact size and Velcro straps.
Note: In many countries (e.g., Austria, Italy, Portugal, and Spain), the removal of a pharmacy is required by law!
Can be mounted without additional mounting materialWelded seamsCapacity 5 LiterRobust and waterproof bagWaterproof roll closureResistant waterproof coating
REARBAG
Manufactured with the highest quality materials
Elegant design
Design to fit precisely
Extremely robust zippers with large pullersIncludes rain protection cover
PVC coated zipper
Easy mounting on the passenger seatNo additional fixing required
An extension of the volume around its entire perimeter allows the volume to be increased from 10...
Allows for secure machine attachmentProtects handlebars and tank from scratchesMade of highly durable ballistic nylonLoad capacity of 280 kg.
With handlebar loopsWith a rubber hook and carabiner at the ends of the straps
Super practical: The clever mounting system with central adapter replaces the wheel axle spacer sleeve and allows tire replacement, brake checks, etc., without removing the brake cover
Protects the motorcycle from dust, scratches and the like.
Fabric that completely prevents the entry of dust and dirt
Material with special structure
The inner side has a soft lining
Specially designed for the demands of off-road ridingPerfect fitPlug & play installationThe optimized shape offers greater leg freedom and improved contact with the motorcycleHigher than the standard seat
+20mm
With protective cap
Easily accessible.
Convenient and easy to use.
For powering your navigator or other power-hungry devices.
Output voltage/current: 5 V/2000 mA
Quick Charge 2.0
The kit includes two lower riser parts and two mounting bolts.The upper riser parts and their bolts are used from the original kit.If in doubt, check compatibility with your motorcycle model and year.
Made of plasticOptimal protection against stone impactsIn the event of a fall, it protects the cover from being impacted by the brake leverFits the original outer clutch cover.2011 to 2017
Made of high-quality, machined aluminum. Anodized surface for an elegant look.Extremely lightweight.Stylish aesthetic with added value in terms of technology and ergonomics.Adjustable opening. Folds down when in contact with the ground.Prevents lever breakage.
All KTM parts are manufactured from the highest quality aluminum and are therefore not only beautiful to look at, but also suitable for withstanding the most extreme loads.With official factory-look anodized aluminum PowerParts you can transform your KTM into an absolutely special motorcycle.
All KTM parts are manufactured from the highest quality aluminum and are therefore not only beautiful to look at, but also suitable for withstanding the most extreme loads.With official factory-look anodized aluminum PowerParts you can transform your KTM into an absolutely special motorcycle.
Excellent weather protectionClosed versionTwo-component plastic hand coverBlack center section = maximum tear resistance for optimal protectionColored top and bottom sections = highly flexible when subjected to the toughest loadsSupplied in two different heightsImproved opticsTall version
Elegant looking anodized surfaceOutstanding aesthetic appearance with added value in technique and ergonomics
They fold down in contact with the groundPrevents breakage of the leversSuitable for all Brembo® hydraulic clutch lever assemblies
Made of high quality aluminum, machinedElegant looking anodized surfaceOutstanding aesthetic appearance with added value in technique and ergonomicsPerfect ergonomic shape as a result of vast racing experienceAdjustable openingSuitable for all Brembo® hydraulic clutch lever assemblies.
For all types of travelComfortable and easy to useExtremely lightweight.7.4V manual air compressor -Maximum pressure: 7.59 bar / 11 PSI / 759 kPaPower: 7.4 V; 6 A; 44.4 wattsMaximum runtime: 15 minutes (enough to inflate both tires)Powered by a 7.4 V, 2,200 mAh lithium-ion batteryThe hose and adapter can be stored in the crankcase.Charging cable with...
Specially developed for lithium iron phosphate batteries13.2 volt voltage2.5 amp charging currentOptimizes battery power and lifeReset mode in case of low battery voltagePrecise battery monitoring
ANTI-VIBRATION MODULE
Includes an anti-vibration module which decouples the smartphone from the smartphone bracket respectively the motorcycle with a specific developed elastomer inlay.It reduces the transfer of vibrations, generated by the motorcycle, to the smartphone and protects it`s sensitive components.
Can be mounted on older versions of the...
Sturdy and waterproof bagWaterproof roll-top closureWelded seamsPerfect combination of quality and universal usability. All necessary assembly materials included.
RALLY SEAT 790-890 ADV ORANGESpecially designed for the demands of off-road ridingPerfect fitPlug & play installationThe optimized shape offers greater leg freedom and improved contact with the motorcycleHigher than the standard seat+20 mm
No engine remapping requiredStainless steel outer casing and internalsStainless steel exhaust tipImpressive soundUncompromising racing aestheticsEngraved logo
We use our own and third party cookies to collect information to improve our services and to analyze your browsing habits. If you continue browsing, it means acceptance of the installation of the same. You can configure your browser to prevent its installation. More information about cookies.
